This inflatable boat has had quite a few problems most of the blow of the hull at the point of the crash of the hull and the air chamber under the exterior of the film.

Still, the customer wanted to transform the driver's seat from below in a locker storage non-πρωσβάσιμο the others, and, we turned it with some pieces of wood (plywood ) in accordance with the liking of the customer.

Then we continued with the fill of all the points that had been a problem throughout the hull. Then we glued the external tapes waterproofing which stick to the hull with the airlock. After we finished with the staples we scrub the hull and in the end, we're screwed. We took care of all the plastic and steel parts of the ship such as console, driver seat, hinges,roll bar, console etc. γυαλίζοντάς and cleaning the slag, and dirt. Finally we cleared the airlock with specialized cleaning fluids and spent emulsion of silicone for the best protection. As the boat had come from the island for repair and without a trailer in the pack with a similar way to the best k safest transport.